Best StepperMotor For Your 3D Printer
Stepper motors are particularly well suited for 3D printers because they can produce very accurate and repeatable movements. In addition, stepper motors are relatively simple to control and do not require expensive feedback devices to function properly.
There are many different types and sizes of stepper motors available on the market, so it is important to select the one which best suits your needs. For most 3D printers, a Nema 17 stepper motor is a good choice. These motors are widely available and relatively inexpensive.
Comparison Chart For Best Stepper Motor For 3d Printer
1
2
3
4
Best Stepper Motor For 3d Printer Recommendations
Creality Official 42-40 Stepper Motor 3D Printer CR-10 X or Y-Axis Extruder Stepping Motor 2 Phase 1A 1.8 Degree 0.4 N.M Compatible with CR-10 Series and Ender-3 Series E-axis （D-Shape）
The Stepper Motor is a product by Creality and it is used in different 3D printers. This motor is for the X or Y-Axis of the printer and it is made to be extruder stepping motor 2 phase 1A 1.8 Degree 0.4 N.M compatible with CR-10 Series and Ender-3 Series E-axis. The motor has a lot of features that are good for the user, some of these include: low noise, efficient heat dissipation, holding torque of 04NM, and a rated current per phase of 1A. This means that the user will not have to constantly replace or repair the engine, and that the amount of vibrations and noise made by the motor is greatly reduced. Another feature of this motor is that it is precision made with a shaft diameter of 5mm (D-shape) to fit into the high-strength synchronous wheel and synchronous gear. This allows for accurate constant ratio, uniform revolution, and high transmission efficiency while avoiding system errors and obtaining accurate results. The customer service for this product is available 24/7 and provides a 12-month limited warranty as well as lifetime technical assistance.
Common Questions on Creality Official 42-40 Stepper Motor 3D Printer CR-10 X or Y-Axis Extruder Stepping Motor 2 Phase 1A 1.8 Degree 0.4 N.M Compatible with CR-10 Series and Ender-3 Series E-axis （D-Shape）
• What is the maximum current draw for this motor?1.0A
•What is the holding torque for this motor?
0.4N.M
•What is the step angle for this motor?
1.8 degrees
•What size is the shaft on this motor?
5mm
•What is the length of the wire leads on this motor?
20cm
Why We Like This
• 1. 100% official Creality product• 2. High quality and durable• 3. Low noise and efficient heat dissipation• 4. Precise rotation and high transmission efficiency• 5. 12 months limited warranty and lifetime technical assistance
Additional Product Information
| Height | 1.574803148 Inches |
| Length | 1.6535433054 Inches |
Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series
Looking for a reliable and precise stepper motor for your 3D printer extruder? Look no further than the Creality 3D Printer 42-40 Stepper Motor! This top-quality motor offers smooth speed, stable performance, low noise operation, and no loss of steps – perfect for ensuring trouble-free use of your 3D printer. Additionally, the holding torque of 0.4 N.m and current rating of 1A make the 42-40 Stepper Motor ideal for use with the E-axis of CR-10 Series and Ender-3 Series 3D printers.
Common Questions on Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series
• What is the name of the product?Creality 3D Printer 42-40 Stepper Motor 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder Compatible with E-axis of CR-10 Series and Ender-3 Series
• What is the product used for?
The product is used for 3D printing.
• What are the key features of the product?
The key features of the product include its 2 phases, 1A current, 1.8 degrees step angle, and 0.4 N.m holding torque.
• How does the product work?
The product works by feeding filament to the 3D printer extruder in order to create 3D objects.
Why We Like This
• The stepper motor 42 40 applies to Eixe series Ender and CR 10 (eg Ender 3 / Ender 3 Pro / CR 10 / CR 10S etc).• 18 degree step angle, 04 NM holding torque, with 08 A rated current per phase.• The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.• Stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.• 1x 42 40 Stepper Motor (Note: This item does not include a connection cable or screws).
Creality 3D Printer 42-40 Stepper Motors 2 Phase 1A 1.8 Degree 0.4N.M Stepping Motor for 3D Printer Extruder Compatible with CR-10 Ender-3 E-axis（D-Shape）
The 42-40 Stepper Motor from Creality is a reliable and affordable motor for use with the company’s Ender series 3D printers, as well as the CR series. This particular motor is designed for use with the e-axis on these models, providing a holding torque of 0.4NM and a step angle of 1.8 degrees. The motor is also compatible with the Y-axis on the Ender5 and CR-10V2. This high-quality stepper motor has a rated current of 8A per phase and a shaft diameter of 5mm. It is a compact motor measuring just 42 x 42 x 40mm, making it an ideal choice for 3D printer applications.
Common Questions on Creality 3D Printer 42-40 Stepper Motors 2 Phase 1A 1.8 Degree 0.4N.M Stepping Motor for 3D Printer Extruder Compatible with CR-10 Ender-3 E-axis（D-Shape）
• What is the weight of the product?170 grams
• What is the width of the product?
42 mm
• What is the height of the product?
40 mm
• What is the depth of the product?
1A 1.8 Degree
• What is the purpose of the product?
The product is a stepper motor for a 3D printer. It is used to drive the extruder on the printer.
Why We Like This
• 42 40 Stepper Motors for the e axis of the printer of the Creality Ender series and the CR series• 18 degree step angle• 04 NM holding torque• 08 A rated current per phase• Shaft diameter: 5mm• (D shape)• Motor size: 42 * 42 * 40mm (17 * 17 * 16in)
Creality Official 42-40 Stepper Motor with Extruder Gear 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder Compatible with E-axis of Ender 3 or Ender 3 V2 or Ender 3 pro or Ender 5 or CR-10 3D Printer
The Creality Official 42-40 Stepper Motor with Extruder Gear 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder is a top quality product that is guaranteed to be 100% compatible with the Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer. This stepper motor offers a holding torque of 04 NM and has a rated current of 1A per phase. It is designed with a high precision synchronous gear that reduces vibration and noise during operation. In addition, it comes with a reliable after-sales service that provides detailed solutions if you have any problems during installation or use.
Common Questions on Creality Official 42-40 Stepper Motor with Extruder Gear 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder Compatible with E-axis of Ender 3 or Ender 3 V2 or Ender 3 pro or Ender 5 or CR-10 3D Printer
• What is the purpose of a stepper motor?Stepper motors are used to convert electrical pulses into mechanical motion. By precisely controlling the number of pulses, the stepper motor can be made to move very precisely, making it ideal for use in 3D printers.
• How does the Creality Official 42-40 Stepper Motor work?
The Creality Official 42-40 Stepper Motor works by converting electrical pulses into mechanical motion. By precisely controlling the number of pulses, the stepper motor can be made to move very precisely, making it ideal for use in 3D printers.
• What are the benefits of using a stepper motor?
Stepper motors offer several advantages over other types of motors, including precise control, high torque, and low noise operation.
Why We Like This
• 1. 100% Creality official stepper motor• 2. Compatible with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR 10/CR 10s/CR 10 V2/CR 10V3 3D Printer• 3. 18 degree step angle, 04 NM holding torque, with 1A rated current per phase• 4. High precision, low vibration and noise• 5. After sales service available
Additional Product Information
| Color | Black |
Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2Ender 3 ProEnder 3 NeoEnder 3 V2 NeoEnder 3 Max NeoEnder 5Ender 7CR6 SECR10Vyper 3D Printer
Redrex’s Dual Gear Ender 3 Extruder is compatible with Creality Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo, Ender 5, Ender 5 Pro, Ender 5 Plus, CR10 Serie, and Vyper 3D Printers. This all metal dual drive extruder with motor kit comes with a high torque Nema 17 stepper motor that provides 1A 40Ncm/57gcm^2 in holding torque. The extruder’s filament is gripped by the dual drive much more firmly with less deformation, so it doesn’t jam as much in the tube, nozzle or hotend. Additionally, the idler gear is upgraded with two washers on both sides to prevent the sharp gear from riding against the bottom of the arm or chewing it up. Please calibrate the E-steps from 100 to 139 and lubricate the gears before first use. For 3d printers with filament detector, as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height. For Vyper users, please swap the motor wire sequence to make it turn forward instead of reverse.
Common Questions on Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2Ender 3 ProEnder 3 NeoEnder 3 V2 NeoEnder 3 Max NeoEnder 5Ender 7CR6 SECR10Vyper 3D Printer
• What is the name of the product?Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor
• What is the product used for?
The product is used for 3D printing.
• What printers is the product compatible with?
The product is compatible with Creality Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo, Ender 5, Ender 7, CR6, SECR10, and Vyper 3D printers.
• How does the product work?
The product works by extruding filament through a nozzle at high temperatures to create 3D objects.
• What are the benefits of using this product?
The benefits of using this product include improved 3D printing accuracy and precision, as well as increased durability and reliability.
Why We Like This
• 1.Double Gear Extrusion Mechanism for improved filament feeding• 2.Upgraded Idler Gear Design prevents wear and tear on the arm• 3.Compatible with a wide range of 3D printers• 4.High Torque Motor for improved stability• 5.E steps can be calibrated for optimal performance
Buying Guide for Best Stepper Motor For 3d Printer
When choosing a stepper motor for your 3D printer, there are a few things to consider. Look for a motor with high torque and low vibration. You’ll also want to make sure the motor is compatible with your 3D printer’s control board. Here are a few other things to keep in mind when choosing a stepper motor:
– Make sure the voltage and current rating of the motor is compatible with your 3D printer’s power supply.
– Choose a motor with an encoder if you want feedback on position and speed. This is especially important if you’re planning on using your 3D printer for high-precision applications.
– Consider the size of the motor. Stepper motors come in a variety of sizes, so make sure to choose one that will fit inside your 3D printer’s frame.
Frequently Asked Question
What are the dimensions of the motor?
In general, the motor will be a cylindrical shape with a diameter of around 10-20 cm and a height of around 15-30 cm.
What is the weight of the motor?
On average, a typical electric motor will weigh between 5 and 10 pounds.
What is the power rating of the motor?
The power rating of the motor is 1.5 kW.
What is the maximum speed of the motor?
The maximum speed of the motor is 100 rpm.
What is the holding torque of the motor?
The motor’s holding torque is the amount of torque that the motor can produce to keep an object in place.
Conclusion
In conclusion, the best stepper motor for 3d printer is a great product that is perfect for those who are looking for a reliable and durable product. It is easy to use and install, and it comes with a one-year warranty.